REPLACE CYLINDER HEAD ASSEMBLY - Continued.
C. INSTALL Continued.
INSTALL VALVE COVER, VALVE COVER
GASKET, AND OIL BREATHER HOSE TO
CYLINDER HEAD ASSEMBLY.
Place valve cover gasket (46) and valve cover
(42) onto cylinder head assembly (15). Secure
with washers (45), lockwashers (44) and bolts
Do not overtighten bolts. If bolts are
overtightened, damage may occur to
valve cover or bolts.
Install and securely tighten bolts (43). Do not
overtighten bolts. Overtightening may cause
bolts to break or damage valve cover (42) or
valve cover gasket (46).
Do not install oil breather hose (41) or hose
clamp (40) until after fuel injectors and lines
have been installed per paragraph 2.18.
GO TO NEXT PAGE