TM 5-3895-373-20
NOTE
There is a left hand and a right hand
push roller on the bumper. This
procedure refers to replacing and
repairing
left
hand
push
roller.
Procedure is identical for right hand
push roller. Left hand push roller is
shown in this procedure.
A. REMOVE.
1.
REMOVE
PUSH
ROLLER
AND
BEARING
SHAFTS FROM VEHICULAR BUMPER.
a.
Remove and discard lubrication fittings
(1).
b.
Remove hex head cap screws (2) and
lockwashers (3). Discard lockwashers.
c.
Hold, twist and pull bearing shafts (4) from
both ends of push roller (5) and roller
brackets (6).
d.
Lift push roller (5) from vehicular bumper
(7).
GO TO NEXT PAGE
10-3