REMOVE - Continued.
REMOVE ACCUMULATOR AND FITTINGS.
While holding accumulator (1), loosen
hose clamps (7).
Remove accumulator (1) and cushioning
across hex flats. Unscrew straight adapter
(9) with attached cross (10), elbows (5),
straight adapter (6), and pipe nipple (11).
flammable and can be an irritant to
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
Drain hydraulic oil from accumulator (1)
into drip pan. Dispose of hydraulic oil in
accordance with local procedures.
Remove and discard preformed packing
procedures only as needed to replace
damaged or faulty components.
Remove elbows (5) and/or straight adapter
(6) and pipe nipple (11) from cross (10).
Remove pipe nipple (11) from straight
GO TO NEXT PAGE