HANDLE REVERSE TRACKING.
Move left and right control handles (4 and 7)
together to full reverse position.
Check to see if one track is moving slower or
faster than the other one. Paving machine will
veer to the right or left with both control handles
in same position.
Bring the paving machine to a stop by returning
both control handles to the center, neutral,
When adjusting RMAX potentiometers,
speed of slower track must always be
Shut off engine and remove key from ignition
switch per TM 5-3895-373-10.
If left track is moving faster than the right track,
adjust RMAX potentiometer clockwise on right
control handle (7) to increase right track speed.
If right track is moving faster than the left track,
adjust RMAX potentiometer clockwise on left
control handle (4) to increase left track speed.
Start paving machine. Refer to TM 5-3895-373-
Drive paving machine in reverse to ensure left
and right track are moving together at the same
speed when both control handles (4 and 7) are in
the same position.
Return control handles (4 and 7) to the center,
neutral, position and turn paving machine off
when adjustment is complete. Refer to TM 5-
Recheck the forward adjustments.
GO TO NEXT PAGE