TM 5-3895-373-20
C.
INSTALL - Continued.
d.
Install button head cap screw (73), ground
wires (72, 71, and 70), flat washer (69), and
self-locking hex nut (68). Tighten hex nut to
9 lb-ft (12 Nm).
WARNING
Electrical insulating varnish fumes
can be harmful if inhaled. Use only in
a
well
ventilated
area.
Avoid
prolonged exposure to fumes. If
personnel become dizzy or drowsy
during use, get immediate medical
attention.
e.
Apply electrical insulating varnish to ground
connections.
f.
Apply electrical insulating compound to
male end of electrical connector (74) and
reconnect.
g.
Install tie wraps where previously removed.
h.
Install switch panel assembly (67) into
position on operator control console (8).
i.
Install and tighten button head cap screws
(66).
GO TO NEXT PAGE
7-45