TM 5-3895-373-20
A.
REMOVE - Continued.
2.
DISCONNECT ELECTRICAL CONNECTORS
AND
REMOVE
HARNESS
CLAMP,
HARNESS SUPPORT ANGLE, AND CONDUIT
MOUNTING FLANGE FROM FRONT PLATE.
a.
Unlock handle (7) and slide operator
control console (8) to the far left.
b.
Lock handle (7) so operator control
console (8) will not slide.
c.
Inside the front plate, tag and disconnect
electrical connectors (9 through 18).
GO TO NEXT PAGE
7-25