REPLACE EXHAUST MUFFLER AND PIPES - Continued.
INSTALL - Continued.
Install muffler brackets (14) to muffler
support bracket (18) using hex head cap
screws (15), lockwashers (16), and flat
washers (17). Do not tighten.
Install muffler mounting clamps (11) to
muffler brackets (14) using bolts (12) and
flat washers (13). Tighten, using crowfoot
wrench, to 25 Ib-ft (34 N. ).
Anti-seize compound can cause eye
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
Coat threads of clamp (7) with anti-seize
compound and install over non-flared end
of pipe reducer (8). Tighten hand tight.
Insert exhaust muffler (6) inlet over pipe
reducer (8) and set exhaust muffler in
muffler mounting clamps (11).
Coat threads of screws (9) with anti-seize
compound and secure muffler mounting
clamps (11) with screws and nuts (10).
Tighten to 25 lb-ft (34 Nm).
Tighten hex head cap screws (15) to 25
lb-ft (34 Nm).
Tighten clamp (7) nuts to 45 Ib-ft (61
GO TO NEXT PAGE