INSTALL - Continued.
Fuel is very flammable and can
To avoid serious injury or death:
Always wear safety glasses/goggles
at all times.
Keep fuel away from open flame or
any spark (ignition source).
Keep at least a B-C fire extinguisher
within easy reach when working with
fuel or on a fuel system.
Do not work on fuel system when
engine is hot; fuel can be ignited by a
Post signs that read "NO SMOKING
WITHIN 50 FEET" when working with
open fuel lines or fuel tanks.
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
Apply hydraulic fitting sealant to thread of tube
reducer (8). Connect swivel tee (7) to tube
reducer. Tighten swivel tee.
Apply hydraulic fitting sealant to threads of
straight adapter (6). Connect straight swivel
adapter (5) to straight adapter. Tighten straight
Tighten tube coupling nut (2) on induction heater
fuel pipe (3) and tube nut (9) on fuel injection
pump metal tube (10).
Bleed engine fuel system per paragraph 2.23.11.
Close front top left access door per TM 5-3895-373-10.
Close front top right access door per TM 5-3895-373-10.
END OF TASK