2.23.9. REPLACE HYDRAULIC CHARGE FILTER ELEMENT - Continued.
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
HI cleaning solvent is 200°F (93,3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
CLEAN INSIDE OF FILTER BOWL (2) AND
SOLVENT AND LINT-FREE CLOTH.
Hydraulic oil can be moderately
flammable and can be an irritant to
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
COAT O-RING (7) WITH CLEAN HYDRAULIC
INSTALL FILTER ELEMENT (3) ONTO FILTER
COAT O-RINGS (5 AND 6) WITH CLEAN
HYDRAULIC OIL. INSTALL O-RINGS ONTO
FILTER BOWL (2).
GO TO NEXT PAGE