DRAIN - Continued.
Place machinery wiping towel and drain pan
below engine oil filter/cooler assembly (14).
Tag coolant hoses (16) for reassembly.
Loosen hose clamps (15) and disconnect
assembly. Drain all coolant from coolant
Connect coolant hoses (16) to engine oil
filter/cooler assembly (14). Tighten hose
Place water hose in radiator fill port and
drain pan below drain cock (12). Run water
through radiator and engine until clean
water flows from drain cock and coolant
accordance with local procedures.
FILL COOLANT SYSTEM.
Close drain cock (12).
Mix 1-1/2 gal (5.5 l) water with 1-1/2 gal
(5.5 l) antifreeze in radiator filling can.
Install plastic funnel in radiator fill port. Fill
Repeat steps b and c until the radiator
appears to be full.
GO TO NEXT PAGE