Refer to TM 5-3895-373-10 for engine starting and equipment operating procedures. Refer to paragraph 2.10 for
connecting and disconnecting STE/ICE-R test set to DCA. Refer to paragraph 1.18.2 for battery/starter circuit
TO VIEW FLYWHEEL SPUR GEAR:
Turn ignition switch off and remove key.
Turn engine over by grasping fan blades
with hands and rotating fan in either
direction. Rotate fan only about 1/8 turn at
flywheel spur gear between each partial
turn of the fan for missing or damaged
spur gear teeth.