TM 5-3895-373-20
15.13.
ADJUST AUGER/CONVEYOR DRIVE CHAINS - Continued.
B.
ADJUST - Continued.
2.
INSTALL COVER PLATE.
Thread locking compound solvent can
cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
a.
Clean threads of hex head cap screws (1) with
a cleaning cloth soaked in thread locking
compound solvent.
b.
Dry hex head cap screws (1) with a cleaning
cloth.
c.
Install flat washers (2) and square flat washers
(3) onto hex head cap screws (1).
Thread locking compound can cause eye
damage. Wear safety goggles/glasses
when using. Avoid contact with eyes. If
compound contacts eyes, flush eyes with
water and get immediate medical
attention.
d.
Apply thread locking compound to threads of
hex head cap screws (1).
e.
Install cover plate (4), using hex head cap
screws (1). Tighten hex head cap screws to 37
lb-ft (50 Nm).
END OF TASK
15-94