TM 5-3895-373-20
15.8.
REPLACE CONVEYOR DRAG BAR - Continued.
B.
INSTALL - Continued.
c.
Remove the support block from below conveyor
drag plate guard (9).
WARNING
Thread locking compound solvent can
cause
eye
damage.
Wear
safety
goggles/glasses
when
using.
Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
d.
Clean threads of hex head cap screw (7) using
thread locking compound solvent. Dry with a
cleaning cloth.
e.
Install flat washer (8) onto hex head cap screw
(7).
WARNING
Thread locking compound can cause eye
damage. Wear safety goggles/glasses
when using. Avoid contact with eyes. If
compound contacts eyes, flush eyes with
water
and
get
immediate
medical
attention.
f.
Apply thread locking compound to threads of
hex head cap screw (7).
g.
Install hex head cap screw (7) into conveyor
drag plate guard (9). Tighten to 90 lb-ft (122
Nm).
GO TO NEXT PAGE
15-64