TM 5-3895-373-20
14.6.
REPLACE/REPAIR
BURNER
FUEL
SOLENOID VALVE.
This task covers:
a. Remove
b.
Repair
c.
Install
INITIAL SETUP
Tools:
References:
General mechanic’s automotive tool kit
TM 5-3895-373-10
(Item 54, Appendix E)
TM 5-3895-373-24P
Bench vise (Item 55, Appendix E)
Torque wrench (Item 69, Appendix E)
Equipment Condition:
Screed steps removed
per TM 5-3895-373-10.
Materials/Parts:
Cleaning cloth (Item 7, Appendix C)
Cleaning solvent (Item 24, Appendix C)
Culture swabs (Item 26, Appendix C)
Electrical insulating compound (Item 11, Appendix C)
Hydraulic fitting sealant (item 21, Appendix C)
Lint-free cloth (Item 8, Appendix C)
Pipe sealant (Item 22, Appendix C)
Protective caps (Item 5, Appendix C)
Tags (Item 27, Appendix C)
Thread locking compound (Item 13, Appendix C)
Thread locking compound solvent (Item 25, Appendix C)
Fuel solenoid valve assembly
Lockwashers
Plunger repair kit
Sleeve assembly
Solenoid coil
NOTE
There are four burner fuel solenoid
valve assemblies installed on the
paving machine. Two are on the left
side and two are on the right side.
They are installed as mirror images of
each other. This procedure explains
the removal of the right side solenoid
valve assemblies. The procedure for
the left side is identical.
GO TO NEXT PAGE
14-50
