REPLACE BURNER CHAMBER AND FUEL
SPRAY NOZZLE Continued.
INSTALL MAIN SCREED BURNER CHAMBER
When installing the burner chamber
assembly, make sure that glow plug
is pointing out toward the rear of
assembly (42) onto paving machine.
Connect flexible pipe (43) to burner chamber
Install lockwashers (41) onto hex head cap
Sealing compound can cause eye
damage. Wear safety goggles/glasses
when using. Avoid contact with eyes.
If compound contacts eyes, flush
eyes with water and get immediate
Apply sealing compound to threads of hex head
cap screws (40).
Install hex head cap screws (40) into burner
chamber assembly (42). Tighten cap screws to
37 Ib-ft (50 Nm).
f. Apply sealing compound to threads of clamp
g. Install clamp (39) and hex nuts (38). Tighten hex
nuts evenly to 9 Ib-ft (12 Nm).
GO TO NEXT PAGE