Turn the control console brake counter-
clockwise to unlock the operator control
Slide operator control console along guide
shaft to the desired position.
Lock the console in place by turning
control console brake handle clockwise.
Adjust the operator seat height.
Loosen the operator seat release knob by
turning counterclockwise to unlock seat.
Loosen screw knob securing protection
cover to top of screed control box.
Remove the retaining pin and locking pin.
Extreme care must be taken when
machine. Falling from platform can
cause severe injury or death.
Raise or lower the operator seat to a
comfortable 3 height allowing adequate
visibility around the paving machine.
Replace the locking pin and cotter pin.
Tighten seat release knob clockwise to
lock the seat in position.
Stow the protective cover on top of the
protective cover upside down, setting on
hinge pin, and securing with screw knob
through the slot.
Adjust the operator seat position forward or
Pull the seat release lever out away from
the operator seat.
backward to a comfortable position.
Push the seat release lever in to lock the
operator seat position.