TM 5-3895-371-24 & P
(9) Slip out return plate (32, fig. 3-23) and piston
assemblies (31). Pick wear plate (34)
from cam assembly (42).
On a major overhaul, replace trunnion bearings (40,
(10) Inspect cam assembly (42) for damage. Remove any burrs or nicks from the face of the
cam with a fine stone. Inspect trunnion bearings (40) for galling, roughness, or cracked cages. If damag-
ed, press trunnion bearings from cam assembly (42) using an arbor press and a plug 1-1/2 in. in diameter.
Figure 3-23. Removing Cam Reaction P/ate.