TM 5-3895-371-24 & P
(1) Place the pump
in a shaft down position. Remove six
capscrews (1) and lockwashers
(2). Lift off pump cover (3).
Remove plate (4), shim gasket(s) (14) and O-ring (5).
spacer assembly (7, fig. 3-5) which includes the
a dowel pin.
not remove the dowel pin from the spacer assembly unless damaged. Note the relationship of the valve
alinement of the dowel pin with the recessed hole in the inner face of the pump cover (3, fig.3-4). This
relationship must be preserved upon reassembly to insure the proper function of the charge pump.
Remove charge pump assembly (8, fig. 3-6) consisting of inner and outer rotor.
Figure 3-5. Charge Pump Upper Valve Plate.
Figure 3-6. Charge Pump Eccentric, Inner and Outer Rotor.