TM 5-3895-371-24 & P
Figure 2-2. Bumper Terminal Board Wiring Connectors.
2-10. Body Lamps Wire Harness Routing.
Removal of Harness. (See fig. 2-3.)
(1) Remove connector (9) from male connector on lower left rear corner of body by
pushing in and turning lockring to the left.
Drop connector (9) with body lamps harness (8) down over frame rail.
Remove six wire clips (1) and screws (2).
On front of walkway at amber clearance lamps, snip off brown wire at each lamp.