BLOWER DRIVE AND CLUTCH
BLOWER DRIVE DESCRIPTION
BLOWER DRIVE BELT REMOVAL
The blower unit ( fig. 88) Is belt-driven from a sheave
a. Loosen the blower unit mounting screws and
(13) on the power take-off shaft of the PTO drive line.
nuts in order to release the tension on the V-belts from
The V-belt is driven by a hand operated clutch mounted
the power take-off sheave on the PTO drive line.
on the blower shaft. The blower is engaged by pushing
the clutch lever (20) towards the belt drive and
b. Remove belt.
disengaged by pushing the lever away.
c. Reassemble in reverse order
Figure 88. Blower Drive And Clutch