c. Remove the impeller set from the housing (11)
and remove the impeller (10) from the shaft (8).
a. Remove universal joint (hydraulic motor to
d. Remove the driven shaft (22) from the impellers.
b. Remove suback valve lines (Items 72 & 73 page
c. Remove flange bolts from header lines (bottom
INSPECTION AND REPAIR
a. Clean all parts thoroughly.
d. Remove bolts holding pump to intake valve.
b. Inspect for cracks, breaks, bends, corrosion,
e. Remove pump.
distortion and damaged threads
c. Repair or replace damaged parts.
PUMP ASSEMBLY AND
b. Remove bolts from end plates and remove end
plates (6, 12).
Assemble pump in reverse order and install.
Fig. 77. Pump Assembly Exploded View